The Biomass Supply Chain Network Auto-Regressive Moving Average Algorithm

Mostafa Esmaeili Shayan, Gholamhassan Najafi, Abbas Nazari

Abstract


Renewable power plants contribute almost insignificantly in the country’s electricity supply. Due to the environmental uncertainty and the rapid development of modern technology in the recent century, it is usually necessary to predict future situations using insufficient data over a short period. Renewable fuels and biofuels as a significant replacement for fossil fuels have been of great interest in recent decades. Optimum design of supply chains is an essential requirement for the commercial production of biofuels. This research has employed mathematical optimization and a mixed integrated linear programming (MILP) approach for the feedstock pathway to the fuel supply chain (BSC) scenario. The further examination includes the effect of the autoregressive moving average (ARMA) time series structure for demand of biofuels on the design of the supply chain. After developing the model, a numerical example of 8 years was used in the supply chain to gain a wider perspective. The results showed that the optimal cost can be determined and 4 valid locations were adopted out of 10 proposed refinery building sites. Finally, it evaluates and validates the proposed model with experimental results.


Keywords


Renewable, Fuel Supply Chain, Time Series, Biomass, Biofuels

Full Text:

PDF

References


Zahedi, A. R., Labbafi, S., Ghaffarinezhad, A., and Habibi, K., 2021, “Design, Construction and Performance of a Quintuple Renewable Hybrid System of Wind/Geothermal/Biomass/Solar/Hydro plus Fuel Cell,” Int. J. Hydrogen Energy, 46(9), pp. 6206–6224.

Esmaeili Shayan, M., Najafi, G., and Ghasemzadeh, F., 2020, “Advanced Study of the Parabolic Trough Collector Using Aluminum (III) Oxide Seal | Esmaeili | International Journal of Smart Grid - IjSmartGrid,” Int. J. Smart Grid - ijSmartGrid, 4(3), pp. 111–116.

Esmaeili, M. S., and Najafi, G., 2019, “Energy-Economic Optimization of Thin Layer Photovoltaic on Domes and Cylindrical Towers,” Int. J. Smart Grid - ijSmartGrid, 3(2), pp. 84–91.

Wang, F., Ouyang, D., Zhou, Z., Page, S. J., Liu, D., and Zhao, X., 2021, “Lignocellulosic Biomass as Sustainable Feedstock and Materials for Power Generation and Energy Storage,” J. Energy Chem., 57, pp. 247–280.

Knápek, J., Králík, T., Vávrová, K., and Weger, J., 2020, “Dynamic Biomass Potential from Agricultural Land,” Renew. Sustain. Energy Rev., 134, p. 110319.

Esmaeili shayan, M., 2020, Solar Energy and Nuclear Power. Economic Requirements and Hindrances, GRIN Verlag.

Esmaeili Shayan, M., 2020, “Solar Energy and Its Purpose in Net-Zero Energy Building,” Zero-Energy Buildings. New Approaches and Technologies., A. Pérez-Fargallo, and I. Oropeza-Perez, eds., IntechOpen.

Ghasemzadeh, F., Esmaeilzadeh, M., and Esmaeili shayan, M., 2020, “Photovoltaic Temperature Challenges and Bismuthene Monolayer Properties,” Int. J. Smart Grid, 4(4), pp. 190–195.

Zahraee, S. M., Shiwakoti, N., and Stasinopoulos, P., 2020, “Biomass Supply Chain Environmental and Socio-Economic Analysis: 40-Years Comprehensive Review of Methods, Decision Issues, Sustainability Challenges, and the Way Forward,” Biomass and Bioenergy, 142, p. 105777.

Sun, F., Sarin, S. C., Cundiff, J. S., and Sert, I. O., 2020, “Design of Cost-Effective Sorghum Biomass Feedstock Logistics-A Comparison of Different Systems,” Biomass and Bioenergy, 143, p. 105823.

2015, “Biomass Sustainability Criteria: Greenhouse Gas Accounting Issues for Biogas and Biomethane Facilities,” Energy Policy, 87, pp. 95–109.

De Mol, R. M., Jogems, M. A. H., Van Beek, P., and Gigler, J. K., 1997, “Simulation and Optimization of the Logistics of Biomass Fuel Collection,” Netherlands J. Agric. Sci., 45(1), pp. 219–228.

Sharifzadeh, M., Sadeqzadeh, M., Guo, M., Borhani, T. N., Murthy Konda, N. V. S. N., Garcia, M. C., Wang, L., Hallett, J., and Shah, N., 2019, “The Multi-Scale Challenges of Biomass Fast Pyrolysis and Bio-Oil Upgrading: Review of the State of Art and Future Research Directions,” Prog. Energy Combust. Sci., 71, pp. 1–80.

Rabbani, M., Momen, S., Akbarian-Saravi, N., Farrokhi-Asl, H., and Ghelichi, Z., 2020, “Optimal Design for Sustainable Bioethanol Supply Chain Considering the Bioethanol Production Strategies: A Case Study,” Comput. Chem. Eng., 134, p. 106720.

Theozzo, B., and Teles dos Santos, M., 2021, “A MILP Framework for Optimal Biorefinery Design That Accounts for Forest Biomass Dynamics,” Comput. Chem. Eng., 146, p. 107201.

Dal-Mas, M., Giarola, S., Zamboni, A., and Bezzo, F., 2011, “Strategic Design and Investment Capacity Planning of the Ethanol Supply Chain under Price Uncertainty,” Biomass and Bioenergy, 35(5), pp. 2059–2071.

Giarola, S., Shah, N., and Bezzo, F., 2012, “A Comprehensive Approach to the Design of Ethanol Supply Chains Including Carbon Trading Effects,” Bioresour. Technol., 107, pp. 175–185.

Koutlis, C., Papadopoulos, S., Schinas, M., and Kompatsiaris, I., 2020, “LAVARNET: Neural Network Modeling of Causal Variable Relationships for Multivariate Time Series Forecasting,” Appl. Soft Comput. J., 96, p. 106685.

Huang, S., Potter, A., and Eyers, D., 2020, “Using Simulation to Explore the Influence of Online Reviews on Supply Chain Dynamics,” Comput. Ind. Eng., p. 106925.

Gilbert, K., 2005, “An ARIMA Supply Chain Model,” Manage. Sci., 51(2), pp. 305–310.

Azadbakht, M., Esmaeilzadeh, E., and Esmaeili-Shayan, M., 2015, “Energy Consumption during Impact Cutting of Canola Stalk as a Function of Moisture Content and Cutting Height,” J. Saudi Soc. Agric. Sci., 14(2), pp. 147–152.

Lee, H. L., Padmanabhan, V., and Whang, S., 2004, “Information Distortion in a Supply Chain: The Bullwhip Effect,” Manage. Sci., 50(12 SUPPL.), pp. 1875–1886.

Chan, F. T. S., Samvedi, A., and Chung, S. H., 2015, “Fuzzy Time Series Forecasting for Supply Chain Disruptions,” Ind. Manag. Data Syst., 115(3), pp. 419–435.

Cobuloglu, H. I., and Büyüktahtakin, I. E., 2014, “A Mixed-Integer Optimization Model for the Economic and Environmental Analysis of Biomass Production,” Biomass and Bioenergy, 67, pp. 8–23.

Nguyen, Q. A., Smith, W. A., Wahlen, B. D., and Wendt, L. M., 2020, “Total and Sustainable Utilization of Biomass Resources: A Perspective,” Front. Bioeng. Biotechnol., 8, p. 546.

Teo, H. L., and Wahab, R. A., 2020, “Towards an Eco-Friendly Deconstruction of Agro-Industrial Biomass and Preparation of Renewable Cellulose Nanomaterials: A Review,” Int. J. Biol. Macromol., 161, pp. 1414–1430.

Abbasi, D., Ashrafi, M., and Ghodsypour, S. H., 2020, “A Multi Objective-BSC Model for New Product Development Project Portfolio Selection,” Expert Syst. Appl., 162.

Azadbakht, M., Shayan, M. E., Jafari, H., Ghajarjazi, E., and Kiapei, A., 2015, “Factor Resistance Comparison of a Long Shaft in 955 and 1055 John Deere Grain Combine.”




DOI (PDF): https://doi.org/10.20508/ijsmartgrid.v5i1.153.g135

Refbacks

  • There are currently no refbacks.


www.ijsmartgrid.com; www.ijsmartgrid.org

iilhcol@gmail.com; ijsmartgrid@nisantasi.edu.tr

Online ISSN: 2602-439X

Publisher: ilhami COLAK (istanbul Nisantasi Univ)

Cited in Google Scholar and CrossRef